Product description

Dimension: 600 mm*600 mm.900mm*900mm

Thickness: 2.0 mm, 2.5 mm, 3.0 mm

Product introduction

It is composed of polyvinyl chloride resin, plasticizer, stabilizer, coupling agent and conductive material. It conducts electricity through the conductive network formed between the interfaces of plastic particles and has permanent anti-static function.

Application scope

Widely used in electronic, microelectronics, telecommunications environment, network floor, clean room, computer room and other places with precision instruments and equipment action.

Quality Control and Guarantee

1. The conductivity of the product has been tested before it leaves the factory, which meets the quality standard.

2. Sales representatives may provide on-site guidance or technical support.

3. Within one year of purchase, the product has no defects in materials and technology. If it is installed and maintained in accordance with Huajing's construction specifications, Huajing can guarantee its 10-year warranty period (except for man-made and self-construction).

These warranties explicitly replace any other warranties, including but not limited to any implied warranties of commercial feasibility or special use.

Maintain

1. Because of its impermeability, it is easy to clean the surface dirt.

2. Do not scratch the floor with sharp hard objects to keep the surface smooth.

3. Wash the floor with neutral detergent, rinse it with clean water, dry it, and then use antistatic wax.

4. Severe dirty or black spots can be cleaned by ground cleaning machines.

install

Electrostatic conductive floor tiles or electrostatic dissipative floor tiles should be installed on a horizontal, smooth, crackless foundation floor. Residual humidity should be measured under 2.5% according to CM DUMB.

Floor tiles, glue and installation area should reach a temperature of at least 18 degrees within 24 hours before installation. The floor tiles should be bonded with conductive glue with good quality of less than 105 ohms. And for further installation details, please contact us.